1) Individually control : 1pcs LED pixel & 1 IC. Control IC APA102C inserted in SMD5050 rgb led.
2) 20pcs/chain with 8cm wire length between each LED, wire size:20AWG, can be custom-made.
3) It used a silicon case make waterproof by inject A/B Epoxy or silicon
4) DC5V power requirement only(do not exceed 6VDC or short circuit) – no polarity protection,
5) 4 Pin JST connector (non-waterproof), wire for power feeding, also can be waterproof connector.
6) Addressable lights, you can set to any color or animate, like running water, chasing, scanning, flashing, etc..
7) Controller system: SD card controller, DMX controller, Artnet
1) Individually control : 1pcs LED pixel & 1 IC. Control IC APA102C inserted in SMD5050 rgb led.
2) 20pcs/chain with 8cm wire length between each LED, wire size:20AWG, can be custom-made.
3) It used a silicon case make waterproof by inject A/B Epoxy or silicon
4) DC5V power requirement only(do not exceed 6VDC or short circuit) – no polarity protection,
5) 4 Pin JST connector (non-waterproof), wire for power feeding, also can be waterproof connector.
6) Addressable lights, you can set to any color or animate, like running water, chasing, scanning, flashing, etc..
7) Controller system: SD card controller, DMX controller, Artnet
| Part NO | SJ-1818-APA102C |
| Lighting Source | 1pcs SMD5050 RGB LED |
| Beam Angel | 120 degree |
| Operate Voltage | DC5V |
| Consumption Watt/PC | 0.3Watt (max) |
| Size(mm) | 18mm X 18mm |
| Spacing | 8cm, can be customized |
| IC Chip | APA102C |
| Quantity | 20 pcs/string |
| Waterproof Grade | IP66 |
| Cover | Transparent |
